Get Competent to Work Safe: A Tale of Two Sites
by Carl Potter, CSP, CMC and Deb Potter, PhD, CMC
(Broken Arrow, OK)
In this article Get Competent to Work Safe: A Tale of Two Sites, authors Carl and Dr. Deb Potter provide readers with a thought-provoking comparison of how employees at two sites within the same company can have different perspectives about their abilities to recognize and deal with hazards in their workplaces.
The article provides five relevant questions that can be used to self-assess attitudes that create “competent persons” in the workplace.
=======================================
Taking the Mystery out of Competency
In the business of safety, we talk about competency and use the term “competent person.”
OSHA refers to and requires competent persons in several of its standards and defines the term as "one who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them" 29 CFR 1926.32(f).
Yet many managers, supervisors, and leaders find it difficult to know how to apply this definition. Looking at the two primary components, capability to identify hazards, and authority to correct them, helps clarify the definition.
We typically train employees to do the tasks required to do their work and test to make sure they have the required knowledge and demonstrated ability. This is how most companies determine technical competency.
Hazard recognition and control is sometimes part of the training. We then assume that employees know they have the authority to control the hazard or stop the work if conditions are unsafe. However one variable is missing: the willingness to take responsibility.
Two Sites, One Missing Factor
The willingness to take personal responsibility is strongly linked to a person’s values and their acceptance of accountability. This becomes clear when considering the comments made recently by workers at two work sites. At the first site, employees said:
"I got bit by a spider and they asked me if I could have prevented the bite! How am I supposed to know when a spider is going to bite my leg?"
"My boss asked me the other day how I got poison ivy. How can I stay out of poison ivy when I'm tromping through tall grass to get to my work?"
“We’re in such a hurry to get the work done around here, that I don’t have time to put all that stuff away off of my truck. It won’t hurt anyone here on the dock.”
At a second site, we heard employees say,
“It doesn’t take long to put everything back where it goes around here – maybe an extra five or ten minutes at the end of the day. I don’t want to have to worry about tripping over tools and materials the next day and I sure don’t want my buddies to get hurt.”
“I had to work in an area today that is usually infested with spiders and insects. I heard them talk about the new repellant at the safety meeting last week, so I went by the storeroom and got some. It worked well. I didn’t get any bites and I’m glad I listened to the guy at the meeting.”
“We were getting ready to do a new job and I asked my supervisor if he thought there was poison ivy in the tall grass. We weren’t sure. He had us spray the area and we went back the next day and did the work. Some of the guys on my crew get poison ivy easily and we didn’t have any problems this time. It helps to take a little extra time to spray.”
It’s not hard to recognize the difference in the mindsets at these two work sites. Did the hazards (spiders, poison ivy, and poor housekeeping) require highly technical skills? Probably not. Were the employees authorized to deal with these types of hazards that can cause injury or illness? Without a doubt. What was the difference?
Sure, leadership and company culture are factors; however, the primary variation here is the degree to which workers are willing to take personal responsibility for making the workplace safe for themselves and others. It’s not hard to figure out which site most people would choose as their workplace.
Creating the Competent Mindset
Making a jobsite safe requires a specific goal: nobody gets hurt. The strategy to reaching that goal is to recognize and control hazards. It’s like planning a trip across country in a car or plane. First you choose a destination (goal) and then map the best way to get there (strategy).
One way to describe a competent person is one who demonstrates through their actions and behaviors those competencies required to be successful at a task.
If the task is to prevent your own and others’ injuries, then to be a competent person, you need to know what to do to prevent injuries, recognize what causes them, and want to do what it takes to work safe. In other words, people around you perceive that you are mentally positive about safety and physically demonstrate your belief.
Zig Ziglar, a great motivator and thinker, said “Whether you think you can or think you can’t, you’re right.” Can you be a competent person? Certainly.
Use the following questions to help you self-assess where you are with regard to being a “competent person”:
• What have I done to make sure that I understand the technical knowledge and skills required for my work?
• What do I know about the hazards associated with my work and what else do I need to know more about?
• What assumptions do I make about the safety of the work I do? Am I using my opinion or facts?
• How am I using my authority and responsibility for safely performing my work?
• What questions should I be asking my manager, supervisor, or leader so I can be recognized as a competent person?
These are only a few of the questions you can ask yourself to determine the strengths you have as a competent person. You may find some areas where you want to increase you knowledge, skills, and abilities. By starting with yourself, you can determine how competent your work site is.
===============================
Carl and Deb Potter work with organizations that want to create an environment where nobody gets hurt. As advocates of a zero-injury workplace, they are speakers, authors, and consultants to industry.
For information about bringing Carl and Deb to your company or your next conference, contact them at:
Potter and Associates International, Inc. 800-259-6209 or
www.CarlPotter.com
===============================
